4 Repacking Procedure __________________________________________________________________
3.
Store the toner cartridge in its original package following the appropriate guidelines in “Handling
the Toner Cartridge” in the printer user’s guide.
4.
Close the top cover by pressing down on the center section until the latch engages (fig. 4). Then,
Close the multipurpose feeder by folding it up until it snaps in place (fig. 5).
Fig. 4 Close the Top Cover
Fig. 5 Close the Multipurpose Feeder
Oversize Media Support
If an oversize media support is attached to your printer, it must be removed before the printer is shipped.
1.
Lift the oversize media support up until its large tab is free of the mounting well in the center front
of the multipurpose feeder (fig. 6). Then, tighten the support’s two paper guide thumb screws (fig.
6).
Tab
Thumb Screws
Multipurpose Feeder
Tray Extension
Media Guides
Fig. 6 Remove the Oversize Media Support
Fig. 7 Fold the Support’s Leg Up
2.
Fold the support leg up against the bottom of the oversize media support (fig. 7).
