__________________________________________ Installation 2-21
10.
Plug the interface cable into the back of the printer (fig. 2.18; 1).
Then, as you face the back of the printer, pull the interface cable
close to the printer to the right, and place it in the cable rest (fig.
2.18; 2).
1
2
Fig. 2.18 Plug in the Interface Cable
11.
Align the back unit over the rear of the duplexer, making sure
the pointers line up; pull up the back unit’s top and back cover
latches; then, lower it onto the duplexer (fig. 2.19).
Note:
Make certain the duplexer back unit fits against the
printer. A gap may cause a paper jam or output not to
duplex and either
Cover
Open
or
Paper
Jam
to
appear in the window.
Fig. 2.19 Attach the Back Unit to the Duplexer
