How can I record video and audio from the cameras with a VCR?
You may buy a special TV-Enabling cable to connect to the AV port on the Motorola USB
Controller . This port will show whatever camera is currently being viewed through a
live web cam or through motion sensor events.
How can I connect more then 3 wired cameras to the Motorola USB Controller ?
At this time, you may purchase a camera switcher and connect the camera switcher to the
camera port on the Motorola USB Controller . For example, if you connected three 4-
camera switchers to the Motorola USB Controller you could have up to 12 wired
cameras.
Technical Specs
•
Video quality indicator
•
Convenient desktop design
•
Internet connectivity
•
Wizard based setup and configuration
•
Supports both wired and wireless cameras
•
Supports Xanboo sensors (door, window, power, acoustic)
•
Overall size: 160cm x 120cm x 60cm
•
A/V out capable to allow local recording via VCR
•
https secure connections to backend webserver
FCC ID NUMBER: OU4-XBX200 / IC: 4576A
STANDARDS
93/68/EEC, 89/336/EEC, BS EN 50082-1:1992, 73/23/EEC, EN60950:1992 CE
INSTRUCTION TO THE USERS (IF DEVICE DOES NOT CONTAIN A DIGITAL DEVICE)
The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
INSTRUCTION TO THE USER (IF DEVICE CONTAINS A DIGITAL DEVICE)
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interferences will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
