5.
For wireless sensors and cameras, simply push the discovery button on the device
while the Motorola USB Controller is in discover mode.
Please consult the
devices manual for more detailed instructions
.
6.
As each device is detected by the Motorola USB Controller , it will be listed in
the window. NOTE:
This page will refresh every 10 seconds to show newly
discovered devices. You may have to wait for a refresh to see the device listed
7.
Click on the Stop Discovery button when you are finished discovering all of your
devices.
Your Motorola USB Controller and devices are now ready to be used.
Configuring Devices
1.
Start the application from the start menu
2.
Select the Control Panel button
3.
Select the Settings icon next to the device you wish to configure
4.
Select the settings and click the Set button when complete
Controlling Cameras
5.
Start the application from the start menu
6.
Select the Control Panel button
7.
Select the camera that you wish to view from the camera list
8.
To capture an image select the image capture button
9.
To capture a video select the video capture button
Arming /Disarming the System
1.
Start the application from the start menu
2.
Click on the Control Panel button
3.
To arm the system and all devices, select the arm button
4.
To disarm the system and all devices, select the disarm button
Viewing the archive
The Motorola USB Controller stores all informational events, image and video clips
locally in the default data folder. To access the information do the following:
1.
Start the application from the start menu
2.
Click on the Archives button
3.
To view details about the item, click on it
4.
To remove the item from the archive select it and click on Delete
