XAG P Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 73

XAG P Series Скачать руководство пользователя страница 19

@2018 XAG Australia All Rights Reserved Page | 19

Smart Battery

XAG Smart Battery

P-Series Smart battery features upgraded battery cells and XAG Battery Management System (XBMS),

providing up to 25 minutes of mission time, servicing area up to 2 ha per mission. All XAG P-Series Smart

Batteries have additional self-balancing and self-heating function to increase battery life and efficiency, and

ensuring stable operation during low temperature environment.

XAG Smart Battery Functions

1.

Battery Level Display:

The LED indicators display the current battery level.

2.

Auto-Discharging:

To prevent swelling, the battery automatically discharges to 30% of
total capacity when it is idle.

3.

Balanced Charging:

Automatically balances the voltage of each battery cell when
charging.

4.

Overcharge Protection

Charging automatically stops when the battery is fully charged.

5.

Operating Temperature:

The Aircraft will only operate when the temperature is between -
10°C to 40°C

6.

Over Current Protection:

The battery stops charging when a high amperage (more than
10A) is detected

7.

Over Discharge Protection:

Over discharging can seriously damage the battery. Current output
will be cut off when the battery cell is discharged to 2.8V when not
in flight mode. Battery voltage below 2 V may cause a safety
hazard. To prevent this, the battery will not be able to charge if the
voltage of a single battery cell is below 2 V. Avoid using any
batteries matching this description.

8.

Short Circuit Protection

Automatically cuts the power supply when a short circuit is
detected.

9.

Battery Cell Damage Protection

A2 Pilot phone displays a warning message when a damaged
battery cell is detected.

10.

Communication

Information pertaining to the battery’s voltage, capacity, current,
etc is transmitted to the A2 Pilot phone

11.

Heating:

Batteries are able to work even in cold weather, ensuring a safe
flight.

«
...
17
18
19
20
21
...
»

Содержание P Series










































































Отзывы:

Нет отзывов