X4-TECH X-mitter, Инструкция по эксплуатации

Страница: 9 / 11

1
1
Operation
Safety and operation
Safety and operation
Operation
1. Supply your X-Mitter with power by inserting the inclu-
ded AAA batteries or by plugging the car adapter into the
cigarette lighter of your car.
2. Connect an audio device (MP3 player, CD player or other)
to the FM transmitter, by connecting the 3.5 mm jack plug
to the audio devices headphone jack.
3. Use the ON/OFF main switch (5) to turn the FM transmit-
ter on. The FM transmitter is now in a stand-by mode.
4. Activate the FM transmitter by pushing the Stand-by/ON
(1) button.
5. Adjust to a frequency on the FM transmitter. Choose
any frequency between 87.6 and 107.9 that is not already
occupied by a station. Now adjust your radio to this same
frequency.
6. Start the playback mode on the connected audio de-
vice.
Never open this device or technically change it in any way.
Do not use any other cable that could possibly change the
transmitting power, therefore changing permitted autho-
rization, causing termination of operation in the countries
specified above. This device should never be used in air-
planes.
If the signal is heavily interfered, change the position of
the X-Mitter towards a radio or its antenna. The closer the
X-Mitter comes to a radio antenna, the better the radio
reception will be. Sound distortion could mean that your
radio frequency has not been properly adjusted (check the
frequency) or that the volume has been turned up to high
(reduce the volume on the X-Mitter).
Please check contents thoroughly after purchasing. Inclu-
ded you`ll find a car adapter, 2 AAA batteries and the FM
transmitter.