28
29
Cleaning the device
› Unplug the power cable before cleaning. Always use a soft, dry, clean and fuzz-free cloth to
clean the unit’s exterior. If the device is extremely dirty you can use a soft cloth, dampened with
water or a mild cleaning solution to clean. Never use any abrasive or harsh cleaning agents (e.g.
alcohol, benzine or thinners) as these could damage the controls, casing or any markings and
labels found on the device.
› Contribute to a better environment by using a designated disposal system (e.g. Dual System
in Germany) or recycling site for the disposal of packaging material.
Chapter 10
Maintenance, handling and cleaning
Chapter 11
Specifications
Technical data
› Operating voltage: 220 – 240 V/~50 Hz
› Output voltage: 2 V RMS (0 dB)
› Frequency response: 20 to 20 kHz, + 3 dB to – 3 dB
› Signal-to-noise ratio: (FLAT) 75 dB (1 KHz), (IHF-A) 90 dB (1 KHz)
› Channel separation: 58 dB (1 kHz)
› Channel balance: 0.5 dB (1dB)
› THD: (– 10 dB) 0.08 % (1 KHz)
› Optical connection
› Stereo OUT jack
› Dimensions (W x H x D): 430 x 70 x 230 mm
› Weight: 3.5 kg
Delivery contents
› X4-TECH CD-2000ME
› Audio cable
› Remote control
› Batteries
› User manual
› Service data sheet
11
Specifications
