22
23
Chapter 8
CD and MP3 playback
Chapter 8
CD and MP3 playback
button on the remote control down shortly and release again.
Press the
u
/ button to stop fast forwarding and resume playback.
Reverse
Press the
tt
button on the device or the
tt
/
tt
button on the remote control to return to
the beginning of the current song being played. Press this button twice to return to the previous
song. To fast reverse through a song, press either the
tt
button on the device or the
tt
/
tt
button on the remote control down shortly and release again. Press the
u
/ button to
stop fast reversing and resume playback.
Programming a playlist
Create your own personal music playlist with your CD-2000ME. 20 memory presets are available
to you. Please note that this option will not function during playback.
1. Press the MEM button on the remote control.
2. Select the desired song with the
uu
/
uu
and
tt
/
tt
buttons.
3. Press the MEM button to store this song. Now you can select the next song to be stored.
4. Once all of your favourite songs have been stored, press the
u
/ button to start playback.
The letter “M” can be seen on display when a stored playlist is being played.
5. To delete a stored playlist, press the MEM CLEAR button.
Intro
This mode plays the first few seconds of a song before skipping to the next.
Press the „INTRO“ button (ITR ON) to activate this function. The player will play the first ten se-
conds of each song in a normal playback order before skipping to the next song. Press the „IN-
TRO“ button again to cancel (ITR OFF) this function.
Repeat
This device supports two different repeat option modes. Press the REPEAT button once to continu-
ally repeat the current song being played (
). Press the REPEAT button again to repeat the entire
CD continuously (
). Press the REPEAT button a third time to cancel this function.
Random
This function lets you play songs in a random playback order. Press the „RANDOM“ button (RAN
ON) to activate. Press this button a second time (RAN OFF) to deactivate this function.
Encoding function
You can use the encoding function on your CD-2000ME to convert songs on CDs into an MP3
format and to transfer to and store these on connected USB media.
Insert a CD. Once the disc has been read, press the “ENCODING” button on the device. “REC” will
light up on display. After this information stops blinking on display, all of the songs found on
the CD will be played and stored as a MP3 file on the connected USB medium. Press
/
n
the
button once to stop encoding and a second time to stop playback. To convert certain songs on
a CD, press the „MEM” button on the remote control and then enter the respective song number
by using the numerical buttons. Press the „MEM” button once again to confirm your selection.
Repeat this process each time a new song has been selected. Once you’ve finished creating a
playlist you will be able to use the encoding function, as explained above, to start converting
the selected songs on your playlist. Converted songs will be stored in a folder named „RECORD”
in the ROOT FOLDER.
Information on CDs and DVDs
Handling CDs
Do not touch the playback side of discs. Hold by the edges without
touching the recording surface, so that finger prints do not come in
contact with discs. Never stick paper or use tape on discs.
