X4-TECH CD-1200M, Инструкция по эксплуатации

Страница: 14 / 17

26
27 Chapter 8 Troubleshooting Chapter 7 CD and MP3 CD playback
The industry is tending to gradually change back to CDs that are not copy protected, due to the
many problems that DVD players, car radios and other portable playback units are having with
this copy protection method.
This copy protection system was developed to prevent CD cloning and circulation, which is why
many record companies are trying to protect their CDs. Such trends threaten the existence of ar-
tists, musicians and the music industry. The development of the copy protection system has also
led to an illegal circulation of music in the form of MP3 fi les via internet and online exchange.
What it comes down to, is that there are now quite a number of various internet providers on the
market off ering compressed music fi les that can be legally purchased and downloaded. Being
able to listen to diff erent samples of music and having the ability to download directly, one is
only minutes away (granted you have DSL) from desired songs in either MP3 or WMA format.
Copyright information
The reproduction, duplication and copying of copyright protected material, as well as the distri-
bution, circulation, public access to or even the rental of these, without explicit authorization of
the copyright holder, is strictly prohibited.
The device you have just purchased is equipped with state-of-the-art technology and is safe to
operate. Nevertheless, problems or malfunctions may occur.
Before contacting a service technician, refer to the following possible solutions:
Distorted sound or no sound is audible.
› Check if all cables are properly connected.
› Check if all devices have been turned on and/or are connected.
› Check if the right input source has been selected.
› Check the volume control’s position.
› The fi le encoding method is not supported.
Remote control is not working.
› Check if the batteries have been inserted correctly.
› If batteries are empty, replace them with new ones.
› Point the remote control to the remote sensor and press to operate.
› Remove any objects found between the remote control and the remote sensor.
› Make sure the distance between the remote control and the device does not exceed 8 m.
Buttons do not function (on the device and/or remote control).
› Turn the device off and then on again. As an alternative, turn the device off , unplug it from the
power outlet and plug in again. (The device also may not be functioning due to a stroke of light-
ning, static electricity or other external factors.).
Any repairs other than those mentioned above are to be carried out solely by an aut-
horized technician.
8
Troubleshooting