27
Voice control
Press the
button 3 times.
The display shows the last setting and
VOX
on the left.
Use the
and
buttons to select between the sensitivity
levels 1 to 3. 3 is the highest level. To turn off the function, go
to the
0F
setting.
Press the
button to save the setting.
With the VOX (Voice Operated Exchange) function, the walkie
talkie automatically switches to transmit mode when spoken
into the microphone.
i
The VOX function can also be used as a baby monitor. To do
this, turn on the function on a walkie talkie and place it next to
your child. The receiver has the VOX function deactivated.
The transmission is activated by all noises, so it is not recom-
mended to use the function in noisy or windy places.
Send call signal
Press the button once.
The sending and receiving devices will play a sound.
The sending device shows the send icon on the display.
The receiving device shows the receive icon on the display.
Sending a message
Press the
button and speak into the microphone approx.
5cm away. Keep the button pressed while doing so.
Then release the button once finished.
While you are sending a message, you cannot receive or listen
to a message.
