Specifications
Frequency
433 MHz
Protection transmitter
IPX7
Operating Voltage Receiver 220 – 240 V AC /50 Hz
Melodies
25
Reach
max. 100 m (Free-field range)
Dimensions Transmitter
79 x 44 x 32 mm
Dimensions receiver
78 x 50 x 65 mm
Installation and Start-Up
Before you mount the device, please run a quick test.
Plug the receiver into a provided socket. The receiver will work better if
there are no other electric devices in close range. Please try to adjust the
receiver according to the “Range Guide”.
Learning Mode
To enter the learning mode press button B at the side of the receiver for
about 5 seconds. The control lamp will start to blink. The device is now
in learning mode.
Press the transmitter twice. The control lamp of the receiver will start to
blink. The transmitter is now connected with the receiver.
The eco-doorbell-kit will leave the learning mode automatically. If this is
not the case you can leave the learning mode manually by pressing the
transmitter twice.
Adding additional Transmitters or Receivers
To connect additional transmitters to a receiver you have to proceed as
described in step “Learning Mode”. Note that you can only connect a
maximum of 3 transmitters to every receiver.
To connect one transmitter with multiple receivers you have to proceed
as described in step “learning mode” for every receiver. Note that there is
no limit for receivers that are connected to a transmitter.
Volume Control
Shortly press button C at the side of the receiver to switch through three
different volumes.
Choose a Ringtone
Shortly press button B at the side of the device to enter the selection
of 25 melodies. With every other press you can switch through all the
melodies and choose your favorite one.
Silent Mode
Press button C at the side of the receiver for at least 5 seconds. The
control lamp will start blinking. It will take 3 seconds to switch to silent
mode. To leave silent mode you just have to shortly press button B or C.
Installing the Transmitter
Clean the surface where you intend to mount the transmitter as well as
the back of the transmitter itself. Before mounting the Transmitter please
run a test. Put both, transmitter and receiver where you want to mount
them and close all doors. If the receiver does not react or makes no
sound, please see Trouble Shooting.
Important: DO NOT mount the Transmitter to UPVC door
frames or metal surfaces.
Mounting the Transmitter with screws
• Take off the Transmitter from the socket by pushing it upwards.
• Drill holes into the wall at the place you want the Transmitter to be fixed.
• Place the socket on to the required place on the wall.
• Fix the socket with two screws.
• Fix the transmitter to the socket again by pushing it downwards.
Mounting the Transmitter with double sided adhesive pad
Stick the transmitter to the wall with the double sided adhesive pad and
press it for about 30 seconds to make sure it will not fall down.
Disposal
Electrical- and electronic devices must never be disposed of in the regular
household waste!
Consumers are legally obligated and responsible for the
proper disposal of electronic and electrical devices by
returning them to collecting sites designated for the
recycling of electrical and electronic equipment waste. For
more information concerning disposal sites, please contact
your local authority or waste management company.
lived non food GmbH, all rights reserved
No liability will be taken for modifications or mistakes regarding the
technical data or product features described in this user manual.
All rights reserved. Any reproduction, transfer, duplication or filing of
this user manual or parts of it, as well as the translation into a foreign
language or computer language is prohibited without the explicit
approval of the manufacturer. Due to the fast advancement of these
products, no guarantee of completeness can be given. Modifications in
technique and configuration are subject to change at any time.
To receive a digital copy of this user manual, please contact our service
department:
E-Mail: [email protected]
Phone: +49 531 224356-82
Guarantee and service conditions
You receive a voluntary 2-year manufacturer guarantee, starting at
purchase date, for material and production defects of the product. This
guarantee is applicable in Germany, Austria and Switzerland. The receipt
counts as a proof of guarantee. Within the guarantee period we will repair
all material and manufacturer defects free of charge. Your statutory
warranties remains unaffected by this guarantee.
The guarantee does not count
• in case of damages which have arisen after improper use
• for wear parts / accessories that are subject to natural wear and tear
• for defects that are known to the customer at purchase
• in case of damages that occurred due to repair or intervention of the
buyer or an unauthorized third party
• in case the device was connected to a higher voltage as stated on the
device
• when dropping the device or single elements of it
• for improper transportation or packaging
• damages that occurred due to force majeure
• for non-observance of valid safety precautions
• for non-observance of the manual
Batteries / rechargeable batteries are not covered by
the guarantee as they are parts of consumption
In case of a guarantee claim, the date of sale has to be proven by receipt
or invoice. Replacements for reasons covered by the guarantee do not
lead to an extension of the original guarantee period, neither for the
device itself nor for any replaced components. If you are claiming a valid
guarantee, we are entitled to choose whether we will repair the device
free of charge or exchange it for a new device. Any further claims are
excluded. Parts replaced will pass into our property. We reserve the right
to change defective parts or products against follow-up models.
Please always contact us before you return your product.
Provided that a return shipment has been agreed, send the defective
product securely packaged at your own cost to our service department:
It is absolutely necessary that you add a copy of your receipt to your
return shipment. Repairs carried out after the guarantee period are
subject to a charge. We will not accept freight collect shipments and will
return them to the sender.
