X2E XORAYA ML-Z7, Руководство пользователя

Страница: 85 / 208

U
SER
M
ANUAL
X
ORAYA
Z7 | X
ORAYA
ML-Z7
X
ORAYA
S
UITE
85
Priorities of pre-filters
Change the priorities of the pre-filters with the buttons
(4) and (5) .
The X
ORAYA
Suite applies the first pre-filter from the top
that matches the condition. The other pre-filters are
ignored.
The datalogger processes packet data in Online mode and HDD mode via
the so-called default-queue. In the stream-queue, only HDD mode recording
is possible, and streaming data are directly stored without creating
statistics.
The queue dispatching filter compares EtherType and both VLAN tags
( InnerTag , OuterTag ) of received Ethernet frames with the bytes specified
here. (
➔
Set bits)
If all selected filter conditions are matched, the Ethernet frame is assigned
to the streaming data, otherwise to the packet data. If the Ethernet frame
contains no or only one VLAN tag, the filter conditions for the non-existing
fields are ignored.
Via Load presets , you can configure filter conditions in such way that either
all frames are assigned to streaming data ( Streaming logging only ) or all
frames to packet data ( Packet logging only ).
Setting Description Default
EtherType Expected result of the check on the EtherType field
if matching 0x0
TPID (InnerTag) Tag protocol identifier of the inner VLAN tag for
Ethernet frames (always 0x8100) 0x8100
TCI (InnerTag) Expected result of the check on the inner VLAN tag
if matching 0x0
TPID (OuterTag) Tag protocol identifier of the outer VLAN tag for
Ethernet frames
Values: 0x88A8, 0x9100, 0x9200, 0x9300 0x88A8
TCI (OuterTag) Expected result of the check on the outer VLAN tag
if matching 0x0
NOT Invert filter condition Off
Enable packet
logging Record filtered packet data On
Enable streaming
logging Record filtered streaming data On