13
12
F
INE
T
UNING
YOUR
S
YSTEM
The Wireless VGA Video Sender usually works best with the flat faces
of the antennas on the Sender and Receiver units facing each other
(see diagram below). Sometimes, however, reflections and other
effects in your home may affect the signal so that some adjustment of
either the Sender or Receiver antenna might be necessary to get the
best the signal.
T
ROUBLESHOOTING
I
F
YOU
ARE
NOT
GETTING
ANY
AUDIO
OR
VIDEO
AT
ALL
FROM
THE
VR30A
• Check that the CHANNEL slide switch (labeled A, B, C, D) on both
units is set to the same letter.
• Check that both the transmitter and receiver's power supplies are
plugged in. Check that the ON/OFF switch on the transmitter and
receiver are ON.
I
F
THE
SOUND
OR
VIDEO
IS
POOR
,
OR
THERE
IS
INTERFERENCE
• Try changing the channel on both units. Do this by adjusting the
CHANNEL slide switch on each unit to any position (A, B, C, or
D).
• Make sure both units are set to the same letter. Try repositioning
the antenna on each unit.
