X10 SoundPower VK59A, Руководство пользователя

Страница: 11 / 15

2 1 2 1 2 1 2 1 2 1 2 0 2 0 2 0 2 0 2 0
C CC
C
C
ONTROLLING ONTROLLING ONTROLLING ONTROLLING ONTROLLING
X10 M X10 M
X10 M X10 M
X10 M
ODULES ODULES ODULES ODULES ODULES
If you have purchased and installed a Transceiver Module, you can
control it and other X10 modules as follows:
1 . 1 .
1 . 1 . 1 . Press and release the X10 button.
2 . 2 .
2 . 2 .
2 . Use the number buttons to enter the Unit
Code number of the chosen module. (You
do not need to enter ‘0’ first for a single
digit number.)
3 . 3 .
3 . 3 . 3 . Press the appropriate button for the
function you require (see below).
X10 FUNCTIONS:
On = C
Off = CHANNEL –
Bright =
Dim = VOLUME –
All Lamps On = POWER
All Modules Off = MUTE
Note:
You cannot dim or brighten an Appliance Module. If the
module was off and you press Bright or Dim ( or
VOLUME-) this will simply turn the module on.
LLLLL
AMP AMP
AMP AMP
AMP
M M M M M
ODULE ODULE
ODULE ODULE
ODULE
The Lamp Module (sold separately) can be used to control any
incandescent lamp rated up to 300W. It is not suitable for other types
of lamp such as fluorescent or energy saving lamps, or lamps which
include a dimmer control.
Caution:
Do not connect an appliance such as a coffee pot or heater
to the Lamp Module. It may damage the module and the appliance
and could cause a fire hazard. Use an Appliance Module instead.
1 . 1 . 1 . 1 . 1 . Set the House Code
to ‘A’ and the Unit
Code to ‘2.’
2 . 2 .
2 . 2 . 2 . Plug a lamp into
the Lamp Module.
3 . 3 .
3 . 3 . 3 . Plug the Lamp
Module into a
convenient AC
outlet.