☆
User can only bind when the camera device is in the Binding mode
(i.e. LED is blue and flashes once a second). Otherwise, you cannot
bind a camera device when outside of the Binding mode.
☆
Make sure the environment around the camera is quiet when
transmitting the “sound wave” and the outer speaker of your phone is
close to the microphone in front of the camera.
☆
If shown warning “WIFI does not exists”, please make sure your Wi-
Fi network name is correct.
☆
If shown warning “WIFI connection fail”, please make sure your Wi-
Fi password correct.
☆
If shown warning “Network abnormal please check router
configuration”, please make sure your router is connected to Internet.
☆
Check the compatibility of the camera device with your router.
Supports 802.11 b/n/g.
☆
Check whether the name and password of WIFI has been changed.
2) Cannot connect to Internet?
☆
Check if there is a micro-SD card (must be 64GB or less)
☆
Insert a micro-SD card, you can replay video after 10 minutes.
3) Video quality is not clear?
Switch between “SD” and “HD”
or clean the lens of the camera
.
4) Cannot replay video?
5) If the Wi-Fi is hidden, why can
'
t I find any
network or camera device?
Our camera device can only connect to non-hidden Wi-Fi networks.
6) How to restore Factory Settings?
While the camera device is on, use a small object to hold down the reset
button located on the back of the unit for 3-5 seconds. The voice prompt
will indicate that the system is resetting.
During this time, do not unplug the camera device.
5
．
FAQ
1) Cannot bind camera device?
-7-