b
. Your login information will be saved the next time you open the app;
However, it is recommended that you write your login information
down.
c. On Android devices, you will be required to verify your registration
by sending a special code to your email address
. After you hit "send
code" button, you will have 1 minute to enter that code.
2.4 Camera Device and Phone Synchronization
Click the top-left “+” button, click on ‘connect to my camera’ and then
“Next”.
Step 1:
Check to see if the front LED light is flashing: After powering
on the camera, the LED light should be flashing blue, click on ‘Next’
and proceed to Step 2.
Step 2:
Connect to your network:
a.
Find your wireless network in the first field. You can
select ‘Other’ if you do not see your wireless network.
b.
Enter your Wi-Fi password. If your wireless network does not have a
password, click on the ‘No Wi-Fi’ password box. Then click ‘Next
'
.
c.
Follow the instructions on the screen and move your phone speaker
close to the camera’s microphone. Before doing so, make sure you are
in a quiet environment without any noise interference and make sure
your phone is not on silent. Then click ‘send sound wave’.
d.
You will hear a scrambled sound being played from your phone.
Keep your phone still and wait for the duration of the transmission,
before you move your phone away. Afterwards, the
app
will indicate that
the binding was successful and will redirect you to the camera view
interface automatically.
e.
If
the App does not indicate it was successful after 2 minutes or so.
something likely went wrong. Hit
‘Send sound wave’ or click on the
hyperlink and follow the instructions.
-
4-