X10 IconRemote IR27A, Руководство пользователя

Страница: 11 / 26

21 20
Mode Key
Press the MODE key, then select a
device type to change the mode that the
remote is in. E.g., if the remote is in
Cable mode then the hard keys such as
Channel Up/Down, Volume Up/Down,
numbers, etc., operate your cable box.
Also, when you select a mode, any extra
keys for that mode and any keys you’ve
learned for that mode are displayed. The
current mode that the remote is in is shown by an icon in the
lower-left portion of the screen. (The remote screen shown
above is in TV mode.)
X10 RF Devices
Selecting X10 from the MODE key
screen displays the Pick Group screen.
•
Press the Side key for the room that
has the device that you want to
control. (For this example “Master”
was selected. The device icon
displays according to the way
“Master” was set up.)
•
Press the Side key to send a com-
mand to the device. The status of the
device changes. You can see the
status of the device at the bottom of
the screen; and the icon also changes
in appearance.
Press the FAVORITE key to select your
favorites group. Then press the Side
Key next to the logo to change your
device to that channel. Selecting a
favorite group that has not yet been set
up, takes you to the setup Wizard.
Important: Make sure you point the
remote at your device until the channel
changes. Pressing a favorite key might
send the commands for say channel
162, but if you don’t point the remote at your device until all
three digits are sent you might just get channel 16, or even
channel 1.
Watch the flickering halo at the bottom left of the screen, it
flickers for each digit sent. It also shows what device is being
controlled.
Press the HOME key at any time to access the screen to do
setups, or access other features.
Before you continue, press Side Key K5 next to the Help icon
and follow the prompts to get an idea of how to use the remote.
Only Devices you’ve previously set up are displayed. The
others are grayed out.
Favorite Key