X-Tronic 9010-PRO, Инструкция по эксплуатации

Страница: 12 / 16

- 10 -
Nozzle Tip Maintenance
Clean-up: Regularly cleaning the desolder tip on the supplied sponge
(dampen before use) will help keep oxidation and flux off of your
desoldering tip. Flux is a corrosive substance.
When Not In Use Make sure to set your Sleep Timer in the steps above.
Keeping your desoldering iron at set temperature when not in use
negatively impacts heating element life.
Cleaning the Nozzle Tip
Nozzle
Tip
Nozzle
Cleaner
With the desoldering unit powered on and at a working temperature,
take the cleaning shaft included in the package contents and run it
through the desoldering tip. This will help maximize the units desoldering
efficiency.
Cleaning the Heating Element
1. With the unit cooled , remove the retaining nut on the end of the
heating element cover.
2. Power the unit on and wait until it comes up to working
temperature.
3. Clean the inside of the heating element with cleaning shaft
included with the unit.
4. Turn off the unit, wait until cool , and reassemble the desoldering
gun.
Note: The solder inside of the heating element must melt before
the excess solder can be cleaned out. If you cannot get the
heating element clean, please replace the heating element.
Heating
Element
Nozzle
Tip
Heating
Element
Cover
Retaining
Nut
Heating
Element
Cleaning
Tool