X-Tronic 6040-PRO, Инструкция по эксплуатации

Страница: 10 / 16

- 8 -
MAINTENANCE
Do NOT put excess pressure on the tip. It can damage the element.
REPLACING SOLDERING IRON TIP
1. Turn off the soldering station, unplug the power cord from the
power source and allow the soldering iron to cool down to room
temperature. Never attempt to remove the tip while the iron is
hot.
2. Unscrew the larger metal tip retaining screw ring at the bottom of
the soldering irons metal shaft. Slide off or remove the soldering tip
retaining collar. Now, remove the tip by sliding it forward.
3. Slide a new tip over the exposed ceramic heating element, slide
the metal retaining collar over the new soldering tip back onto the
soldering iron.
4. Tighten the metal tip retaining screw ring to snug the tip into place.
Do not over tighten the tip retaining screw
5. Plug the soldering iron AC cord into a grounded outlet to resume
soldering.
REPLACING HOT AIR GUN NOZZLE
1. Turn the power off to the unit and unplug it from the power source.
2. Allow the hot air gun and attachment to reach room temperature
before proceeding.
3. Do not use excessive force when installing/removing hot air
attachments. Loosen the screw and nut from the attachment
by holding the nut with a pair of pliers and turning the screw
counterclockwise.
4. Slide the attachment off of the metallic shaft of the hot air gun.
Repeat in the reverse order for installation.
Do not overtighten the screen
and nut on the hot air gun.