Page9
Operation Instructions
*Be sure all assembly is complete before riding.
*Disconnect charger from scooter and store properly.
Your scooter is operated using a foot push button. To ride the scooter, simply
set on the scooter, select the desired direction and turn the speed switch to the
desired speed. Use your right foot; push the foot button located on the right
footplate. To stop the scooter, simply release the foot button.
1. Locate the high/low speed switch located below the dash. Select
desired speed.
2. Locate the forward/reverse switch located below the dash. Select
the desired mode.
3. To accelerate forward, use your right foot to press the foot button on
the right footplate.
4.
To move in reverse, stop the scooter; switch the forward/reverse
switch into neutral (OFF) then switch the forward/reverse switch into
the reverse position.
Not following this step correctly can
damage the gear box/motor.
5. To stop, simply release the foot button.
6. To park the car, keep the high/low speed switch in the middle (OFF)
position.
Charging Instructions
***WARNING***
An adult should perform charging of the scooter.
TO AVOID
ELECTRIC SHOCK, NEVER ALLOW CHILDREN TO HANDLE THE
CHARGER OR ATTEMPT TO PLUG THE BATTERY CHARGER INTO A
WALL OUTLET!
1. Locate the enclosed battery charger. Plug the charger into a wall
outlet.
2. Unplug the charger socket from the battery under the seat.
3. Plug the battery charger into the charger socket on the scooter.
Depending on the charge remaining in the battery, charging time will
vary. Normal charging time will be 6-8 hours.
Do not allow the charger to charge the batteries for more than 20 hours as
this may damage the batteries.
IMPORTANT SAFETY GUIDELINES
Keep hands, face, feet and hair away from all moving parts.
Do not touch the motor or wheels while they are rotating.
Adult supervision during operation is required at all times.
The scooter is designed for flat terrains only. For safety purposes,
