Page8
Your XR-201 is now complete and ready for use.
6. Install the rear wheels by inserting the long
axle thru the wheel hub covers, wheel and
completely thru both gearboxes. Secure
by using the enclosed washers and nut
caps.
7. Install the handlebar assembly onto the
steering wheel shaft that protrudes up thru
the scooter body until it snaps into place.
Use the enclosed cotter pin and insert thru
the small hole at the top of the shaft.
Bend to keep it in place.
8.
Attach the faceguard to the handlebar
assembly using the enclosed screws.
9.
Attach the battery wires to the gearbox
wires under the seat as shown.
10.
Install the seat by snapping it into place.
