1. Open the charging socket cover located
on the left side of the scooter body.
(Fig. 7)
2. Locate your Battery Charger. (Fig. 8)
Find the charger socket end that has a
three-prong socket and plug it into the
scooter.
3. Next, plug the AC plug into a wall outlet.
When first plugged in, the charger has a
red light and green light that indicate the
charging process has begun. Once both
lights turn green, you may remove the
charger and close the safety cap.
Fig. 7
Fig. 8
Riding
1. Make sure that all of the exposed bolts and screws are tightened.
2. Raise the kickstand to its upright position.
3. Turn the Ignition key to the on position.
4.
Gently rotate the THROTTLE GRIP, on the right side of the handlebars.
The X-560 will begin to move on its own power. Your scooter has a
variable speed hand throttle. You can control the speed of your scooter by
the amount of pressure you use when rotating the hand throttle. The more
you rotate, the faster you will go.
Stopping/Braking
To brake, release the THROTTLE GRIP and depress the BRAKE LEVER on
the left side of the handlebar. Depressing the brake will disengage power to
the motor. When the unit feels like it is loosing power or not accelerating to
full speed, the scooter is ready to be re-charged.
BRAKING SYSTEM
The X-560 uses a hub brake system on the front and rear wheel of the scooter
activated by a hand brake lever on the left & right side of the handlebar.
Make sure to release the HAND THROTTLE GRIP when engaging the brakes.
Practice braking on a smooth, dry surface to get used to the feel of the braking
system. Braking distance is affected by wet conditions and loose and uneven
riding surfaces.
Page9