PACKAGE CONTENTS
Your X-Treme X-560 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme X-560 Scooter
2. Right & Left Side Fairings
3. 36V Battery Charger
4. Tool Kit & assorted nuts/bolts/washers
5. Seat & Seat Post
6. Trunk with Keys & mounting hardware
7. Trunk Rack & mounting nuts/bolts
8. Spare
Fuse(s)
9. Product
Handbook
10. Rear Tail Light
11. Footpad Mat
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-560
Assembly
1.
Carefully remove the X-560 from the box.
2. Slide the handlebars onto the fork. (Fig.
1)
3.
Locate the Handlebar Lock Pin, and
insert it into the side of the handlebar,
ensuring it feeds thru the fork bracket.
Secure the lock pin using the attached
bolt. (Fig. 2).
Slide the handlebar clamp up and over the
base of the handlebar. Tighten the clamp
ensuring the front wheel is in proper
alignment with the handlebars. (Fig. 3)
After the handlebar is securely attached,
slide the black rubber boot over the
connection.
Fig. 3
Fig. 1
Fig.
2
Page7
