Page10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
To adjust the Rear Brakes:
For brakes that are adjusted too tight:
1. Loosen the tension screw on the
left right hand brake lever by
rotating it counter-clockwise until
the wheel spins freely. (Fig. 11)
For brakes that are adjusted too loose:
2. Tighten the tension screw on the
left hand brake lever by rotating it
clockwise until the wheel has a
slight drag. (Fig. 11)
For further adjustment, locate the
adjustment screw on the rear brake hub
and follow the instructions below.
For brakes that are adjusted too tight:
3. Loosen the tension screw on the
brake hub by rotating it clockwise
until the wheel spins freely. (Fig. 12)
For brakes that are adjusted too loose:
4. Tighten the tension screw on the
brake
hub
by
rotating
it
counter-clockwise until the wheel
has a slight drag. (Fig. 12)
For further adjustment:
5. Locate the adjustment screw on the
front brake assembly (located
above the front wheel, Fig. 123)
Tighten or loosen as necessary.
To adjust the Front Brakes:
**For brakes that are adjusted too tight
or too loose, follow steps 1-2 above.
For further adjustment, follow the steps
below.
To adjust the brakes to the desired
tension:
1. Loosen the pinch nut by turning
counterclockwise. Fig. 12
2. Using your free hand, pinch the
brake arms and pull or loosen the
crossover brake cable to the
desired tension. Fig. 13
3. When the desired tension has been
obtained, tighten the pinch nut by
turning clockwise. Fig. 14
