X-TREME X-10, Руководство пользователя

Страница: 9 / 13

Page9
Riding
1.
Make sure that all of the exposed bolts and screws are tightened .
2. Raise the kickstand to its upright position.
3. Push the on/off switch on the left side of the scooter frame, under the footplate. (Fig. 7)
to the ON position.
4. Put one foot on the deck of the X-10 while pushing off with the other foot, gently rotate
the THROTTLE GRIP, on the right side of the handlebars. The X-10 will begin to move
on its own power.
**Your scooter has a variable speed hand throttle. You can control the speed of your
scooter by the amount of pressure you use when rotating the hand throttle. The more
you rotate, the faster you will go.
Stopping/Braking
To brake, release the THROTTLE GRIP and depress the BRAKE LEVER (on the left side
of the handlebars. Depressing the brake will disengage power to the motor. When the
unit feels like it is loosing power or not accelerating to full speed, the scooter is ready to be
re-charged.
FOLDING & STORAGE
When you are done riding the X-10 you can fold it down for compact storage and
transportation. To fold down the X-10, loosen the handlebar-folding clamp and gently push
down the folding handle. If needed, you may need to detach the left and right handle
grips and lower the T-handlebar prior to folding. See Assembly instructions on page 7.
BRAKING SYSTEM
The X-10 uses a hub brake system on the rear wheel. A hand brake lever on
the left side of the handlebar activates the brakes. Squeezing the hand brake
lever with your left hand will activate the rear brake. Make sure to release the
HAND THROTTLE GRIP when engaging the brakes.
Practice braking on a smooth, dry surface to get used to the feel of the braking
system. Braking distance is affected by wet conditions and loose and uneven
riding surfaces.
Adjusting the Brakes
The Brakes on the X-10 should come fully adjusted from the factory.
However, it may be necessary to adjust the brakes from time to time.