Installation diagram for
X-360
tracker
Input 1
(White)
Positive (>DC 6V)
Ignition Key
(*)
or Analog 1 (DC 0-30V)
Input 2
(Grey)
Positive (>DC 6V)
or Analog 2 (DC 0-30V)
Input 3
(Green)
Negative (<DC 0,8V)
Input 4
(Violet)
Negative (<DC 0,8V)
Outputs
Inputs
Power supply
(*) “IG” Function:
Connecting Red & Black wires from AVL unit to
Positive & Negative signals of vehicle main battery, it’s possible to
detect “Engine On” & “Engine Off” status without connecting Input 1
to Ignition Key signal. Enabling this function, the Input 1 wire
becomes available for other use.
In order to let this function enable please take contact with the
C.B.S. providing them the exactly voltage levels measured on the
main battery circuit on both “Engine On” & “Engine Off” conditions.
Power
(Red)
Positive (+)
(*)
DC 8-30V
Power supply –
(Black)
Negative (–)
(*)
GND
“IG”
Function
Output 1
(Yellow)
Negative (160mA @ DC 12V)
Output 2
(Orange)
Negative (160mA @ DC 12V)
Output 3
(Brown)
Negative (160mA @ DC 12V)
Output 4
(Blue)
Negative (160mA @ DC 12V)
GSM antenna
GPS
GSM
X-360
GPS/GLONASS
antenna
P/I/O
