X-tra Seal Smart Sensor Pro+, Руководство пользователя

Страница: 13 / 13

13
( OBDII Prompt)
10. Select UPLOAD CAR IDs
OBDII Continued
11. Successful Write Display
( OBDII Success)
OBDII Errors
NOTE: Some vehicles require additional steps
after the OBDII portion of the relearn is com-
plete. You may have to drive or scan sensors
after you receive the RELEARN COMPLETE
message.
The OBDII Module is sold separately as it is not
required for all situations, and many service fa-
cilities already have a tool capable of perform-
ing this function.
17-144-2 OBDII Module
If you see an error on the screen while
performing an OBDII Relearn. Check to make
sure that the vehicle is in the ON position not
ACC. Also make sure all the connections are
secure.
E1, E2
Reading Communication Error
Make sure vehicle is ON and not ACC
Check for secure connection.
E3, E6
Writing Communication Error
Make sure vehicle is ON and not ACC
Check for secure connection.
E4
Wrong Set Error
Many Lexus vehicles can store more than one
set of TPMS ID’s in ECU. Toggle the vehicles
selected set to the MAIN set. Then retry OBDII
Relearn.
E5
Spare Tire Error
If you receive this error and you did not upload
a sensor ID for the spare, this vehicle requires a
spare. If you did upload a spare but you received
this error, then the vehicle does not store the ID
in the ECU for the spare tire.
Toyota Loop
If you receive E1, E2, E3, or E4 on Toyota / Lexus
vehicles after verifying a good connection, the
vehicle may be stuck in a loop. This happens
when the “SET” button is pressed after introduc-
ing new sensors to the vehicle. This may require
a special tool to remove the vehicle from the
loop.
Learn more about tpms sensors on our website.