10
Copy Sensor
The Copy Sensor feature allows you to create a Smart Sensor with an existing sensor ID.
In most cases, this allows you to avoid performing a vehicle relearn procedure. There are
two methods to copy a sensor. You can wirelessly scan the sensor ID or manually input
the sensor ID.
1. Select Vehicle in Pro+ Tool
2. Highlight and Select Copy Sensor
3. Press ENTER
(Copy Sensor)
4. Place Side of Pro+ Tool Beside
Sensor to be Copied
5. Highlight Scan Sensor ID
6. Press ENTER
(Scan Sensor ID)
7. Tool Display Shows Sensor ID
Wireless Copy
( Display Sensor ID)
8. Place Blank Smart Sensor in
Cradle and Secure Thumb Latch
Wireless Copy Continued...
9. Press ENTER
10. Tool Will Program Sensor
11. Tool Will Display ID
( Display Sensor ID)
NOTE: Make sure you latch the thumb latch and
that the sensor is securely in the cradle. The
Smart Sensor relies on hard contact points to
ensure quick and accurate programming.
Содержание Smart Sensor Pro+
Страница 1: ...Smart Sensor Pro User Guide ...
