6
X-TINGUISH®
X-TREME
QUICK START GUIDE
The New X-Tinguish®
X-TREME
comes equipped with 2 (two)
types of metal pins. This document will explain how the New
R-Pin (2) is used in conjunction with the igniter pin (1).
The New R-Pin was added to secure the Igniter pin in-place.
Deploying the X-Tinguish®
X-TREME
Evaluate the scene and decide the safest place to deploy the X-Tinguish®
X-
TREME
that is nearest the seat of the fire
.
When the decision to deploy the
X-TREME
has been
made and you are in position, firmly grasp the R-
Pin and pull it straight out of the unit. Removing
the R-Pin unlocks the
I
gniter pin so it can be used
to deploy the
X-TREME
. (
Picture 1
)
After removing the R-Pin, firmly grasp the Igniter
Pin (1) and pull it straight out of the unit. Once the
Igniter pin has been pulled the 8 second count-
down until deployment will start and this action
cannot be stopped once initiated. You must deploy
the unit immediately after pulling the pin.
(
Picture
2
)
OVERHAUL AND LOOK FOR HOTSPOTS AS USUAL
5
1
2
3.
4.
Call (855) 377
-
2100 or email info@
flameguardusa
.com with any questions you may have.
Immediately throw the X-Tinguish® X-TREME into
the structure near the seat of the fire. Once the
unit is safely deployed, return to business as usual.
The unit will work independent of any human
intervention. (Picture 3)
After deploying the X-Tinguish ® X-TREME, make
sure all efforts are maintained to ensure a closed
fire room to contain the aerosol.
DO NOT VENTILATE AT THIS POINT.
Allow the X-Tinguish® X-TREME the needed time
to do its job. (Picture 4)
