X-Stand X-SCAPE, Руководство по сборке и безопасному использованию, Страница: 12 / 16

FIGURE 8
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
1
This instruction manual complies with the Treestand Manufacturers Association’s Standard Test Method for Treestand Fall Arrest Systems.
STEP 1. Carefully remove
the cam-buckle straps
from the bark biter of the
standing platform and
the seating platform.
Return the cam-buckle
straps to the accessory
bag.
STEP 2. Lengthen the
security straps by pulling
on the male portion of
the buckle to add slack
to the strap.
NOTE: DO NOT DISCONNECT
THE SECURITY
STRAPS UNDER ANY
CIRCUMSTANCE!
STEP 3. Slip your feet in
the foot straps
STEP 4. While standing
on the standing platform,
set the seating platform
at about knee level and
grasp the sides of the stand by the Seat
section support as you did when climbing up.
Make sure that the cable and bark biters are
firmly contacting the tree.
STEP 5. With all your weight on the climbing
seat of the seat section, turn feet downward
slightly to free the foot section from the tree.
Once free from the tree, lower the foot section
to a comfortable level. Make slow, even
movements of 10-12 inches at a time. Set the
foot section to the tree making sure that the
cable and the bark biters are firmly contacting
the tree. (Fig. 8)
STEP 6. Ease your weight back onto the foot
section, stand, and slide the tree tether down
to about chest height.
STEP 7. Once you are safely back on ground-
level, carefully step off of the foot section
and remove your full body fall arrest harness.
Remove both foot section and seat section
from the tree and store out of direct sunlight
for next use
WARNING! After descending back to the ground, do not remove the full-body fall arrest harness tether from the
tree until you have reached the ground and your feet are safely on firm ground. Failure to follow this warning may
result in serious injury or death!
CLIMBING DOWN
- THE X-SCAPE -