17
16
Installation
1. Use the mounting bracket to mark the screw holes on the ceiling or the wall.
2. Drill holes at the 2 marks using an appropriately-sized drill bit. Insert the anchor plugs
and screw the mounting bracket using the screws provided.
3. Attach the alarm to the mounting bracket and turn clockwise to lock the alarm.
4. Test the alarm according to the steps in the section below.
01
02
03
LED Indicator and Audible Alarm
NOTE: The test function accurately tests the alarm’s heat sensing circuit without the need
to test with fire. If your alarm fails to emit an audible test signal, refer to the
troubleshooting guide at the end of this manual immediately. Never use an open flame to
test this device.
Status
Standby Mode
The LED flashes
red once every
60 seconds.
None
The LED flashes
red 4 times every
4 seconds.
3 beeps every 4
seconds.
The alarm detects
heat from high
temperatures, and
this could mean
there’s a fire indoors.
Alarm
Mode
Unit that
detects heat
and initiates
an alarm.
The LED flashes
red and green 3
times
sequentially
every 4 seconds.
3 beeps every 4
seconds.
Dangerous smoke
concentration is
detected by the
initiating unit in the
network. Please
find the initiating
unit and take
action.
All other
interconnected
units in the
network.
LED Indicator Audible Alarm Action
The LED flashes
red 4 times, then
the LED flashes
green once every
5.8 seconds.
4 quick beeps
repeating every 5.8
seconds.
Dangerous CO
concentration is
detected by the
initiating unit, and
has reached the
alarm status.
Please find the
initiating unit and
take action.
