background image

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in 
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior 
written permission of Seiko

 

Epson

 

Corporation. The information contained herein is designed only for use with 

these Epson printers. Epson is not responsible for any use of this information as applied to other printers.

Trademarks

Epson and Epson Stylus are registered trademarks, Epson Exceed Your Vision is a registered logomark, and 
SpectroProofer is a trademark of Seiko

 

Epson

 

Corporation.

Epson Preferred is a service mark of Epson America, Inc.

X-Rite is a registered trademark of X-Rite, Inc.

General Notice

: Other product names used herein are for identification purposes only and may be trademarks of 

their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Legal Notices

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for 
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of 
this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to 
strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or 
any consumable products other than those designated as Original Epson Products or Epson Approved Products by 
Seiko Epson Corporation.

© 2008 Epson America, Inc. 10/08

CPD-26531

Содержание SpectroProofer





































Отзывы: