background image

Page 2 

CE DECLARATION 

Manufacturer's Name: 

X-Rite, Incorporated 

 
Authorized Representative:  X-Rite, Incorporated 

Siemensstraße 12b • 63263 Neu-Isenburg • Germany 
Phone: +49 (0) 61 02-79 57-0 • Fax: +49 (0) 61 02 -79 57-57 

 
Model Name/No.: 

 

SpectraLight III 

 
Directive(s) Conformance: EMC 

89/336/EEC 

LVD 73/23/EEC 

 

NOTE:

 This is a Class A product. In a domestic environment this product may cause radio interference in 

which case the user may be required to take adequate measures.

 

 

WARRANTY INFORMATION 

X-Rite products meet the 

R

estriction 

o

H

azardous 

S

ubstances (RoHS) Directive 2002/95/EC and 

European Union – 

W

aste 

E

lectrical and 

E

lectronic 

E

quipment (WEEE) Directive 

2002/96/EC. Please refer to 

www.xrite.com

 for more information on X-Rite’s compliance with the 

RoHS/WEEE directives. 

 

 

 

FEDERAL COMMUNICATIONS COMMISSION NOTICE 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 

 

 

INDUSTRY CANADA COMPLIANCE STATEMENT 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 

 

 

EQUIPMENT INFORMATION 

Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise 
design integrity and become unsafe. 

 

WARNING:

 This instrument is not for use in explosive environments. 

 

 

 

 

Содержание SpectraLight III





















Отзывы: