X-Rite PANTONE i1, Руководство пользователя

Страница: 8 / 11

8
General Maintenance
To maintain the measurement performance of your i1 Paint over its life time, it is important to observe
some rules and to periodically clean certain parts that are critical for measurement performance.
•
The i1 Paint device is sensitive to mechanical shocks. To avoid damage during transport the i1
Paint must be always shipped in its original packaging.
• Do not store or operate the i1 Paint device in dirty, greasy or dusty environments. Do not use the i1
Paint in environments with temperatures higher than 35°C (95ºF) or less than 10°C (50ºF). Do not
store the i1 Paint in environments with temperatures higher than 50°C (122ºF) or less than -10°C
(14ºF). The plastic housing of the device may be cleaned using a cloth dampened in water with a
soap solution if necessary.
• Keep the white reference ceramic tile clean at all times. You can clean the white reference ceramic
tile with isopropyl alcohol on a soft clean cloth if required.
• Do not touch the diffuser disc of the ambient light limiting aperture.
Warranty
X-Rite warrants this Product against defects in material and workmanship for a period of twelve (12)
months from the date of shipment from X-Rite’s facility, unless mandatory law provides for longer periods.
During such time, X-Rite will either replace or repair at its discretion defective parts free of charge.
X-Rite’s warranties herein do not cover failure of warranted goods resulting from: (i) damage after
shipment, accident, abuse, misuse, neglect, alteration or any other use not in accordance with X-Rite’s
recommendations, accompanying documentation, published specifications, and standard industry
practice; (ii) using the device in an operating environment outside the recommended specifications or
failure to follow the maintenance procedures in X-Rite’s accompanying documentation or published
specifications; (iii) repair or service by anyone other than X-Rite or its authorized representatives; (iv) the
failure of the warranted goods caused by use of any parts or consumables not manufactured, distributed,
or approved by X-Rite; (v) any attachments or modifications to the warranted goods that are not
manufactured, distributed or approved by X-Rite. Consumable parts and Product cleaning are also not
covered by the warranty.
X-Rite‘s sole and exclusive obligation for breach of the above warranties shall be the repair or
replacement of any part, without charge, which within the warranty period is proven to X-Rite‘s
reasonable satisfaction to have been defective. Repairs or replacement by X-Rite shall not revive an
otherwise expired warranty, nor shall the same extend the duration of a warranty.
Customer shall be responsible for packaging and shipping the defective product to the service center
designated by X-Rite. X-Rite shall pay for the return of the product to Customer if the shipment is to a
location within the region in which the X-Rite service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products returned to any other
locations. Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit
is within the Warranty period must be presented to obtain warranty service. Do not try to dismantle the