C i 6 1 S P E C T R O P H O T O M E T E R
25
NOTE:
Select the backspace character (
) and use the
Left
navigation button to delete the
unwanted characters.
5.
Use the
Left
or
Right
navigation buttons to move the two arrows to the character location
and tap the
Select
button.
6.
Use the
Up
or
Down
navigation buttons to page through the alphanumeric list for the
character location of the name.
NOTE:
You can also use the navigation control to rapidly scroll through a list by touching the
control between the arrows and circle left or right.
7.
Tap the
Select
button set the character.
8.
Tap the
Left
or
Right
navigation button to move the two arrows to the next character space
and tap the
Select
button.
9.
Use the
Up
or
Down
navigation buttons as previously explained to set the character and tap
the
Select
button.
10.
Continue until all characters for the name are set.
11.
Tap the
Right
navigation button and highlight the Checkmark icon
in the Progress
Column.
12.
Tap the
Select
button to save the name for the project.
Measuring a Sample
To measure a sample:
1.
Select the project as previous explained.
2.
From the Measure screen, use the
Up
or
Down
navigation
buttons to move the highlight focus
to the Measure icon
.
3.
Position the instrument on the sample using the techniques previously explained.
4.
Take a measurement via read switch and/or the measure button.
5.
If averaging is used, reposition the instrument on the sample and take additional
measurements. Refer to Using Measurement Averaging later in this section for information.
6.
View measurement results on the display.
