X-POWER XP-12, Руководство пользователя

Страница: 11 / 19

Rev.081022 Page 11 of 19 FUS-20852000-0006
Before Each Use
⚠
WARNING

Inspect winch rope, hook, and slings before operating winch. Frayed, kinked, or damaged winch
rope must be replaced immediately. Damaged components must be replaced before operation.

Wrap the rope under 1000 lbs. of tension before use. Otherwise, the rope may bind during
operation.

Work in a well-ventilated area. Explosive hydrogen gas can accumulate and explode when
ignited by a spark or open flame.

Remove all jewelry and metallic objects before working near batteries.
Operating Instructions
⚠ WARNING
• Read the entire Important Safety Information section at the beginning of this manual, including
all text under subheadings Before Setup or Use of This Electric Winch.
• The instructions that follow are basic guidelines only and cannot cover all situations
encountered during use. The operator and assistants must carefully plan usage to prevent
accidents.
1.
Examine the rope. Do not use the winch if the rope is frayed, kinked, or damaged.
2.
Fully charge the vehicle’s battery.
3. Check th e winch's e l ectr ical connections. AII connections must be tight and clean.
4. Pu t the vehicle's transmission in Neutral.
5. If the vehicle connected to the winch must be stationary, engage the emergency brake and block the
wheels using wheel chocks (sold separately).
WARNING: Never shift winch to free spool position with load on
winch rope.
6. To pull out the rope, move the clutch control to the released position
(shown below). Slide the loop of the hook strap over the hook, then
pull on the
hook strap to pull the winch rope from winch drum.
7. Hook onto the object using a pulling point, tow strap, tree strap, or
chain.
⚠ WARNING
Leave at least five full turns of rope on the drum.