14
®
LEADERS IN POLE & AERIAL FITNESS
Copyright© Vertical Leisure Ltd. 2019 Version 2.0
All rights reserved.
Anti/Counter-Clockwise
Tighten/Expand
Clockwise
Loosen/Shorten
3x Hex Screws
Pole maintenance & removal
Fig. (10.1)
Fig. (10.2)
Hex Key
Hex Key
ANTI/COUNTER - CLOCKWISE to
LOOSEN
A Pole
B Pole
Lay the pole tubes on the floor and undo the X-Joints to disassemble the XPERT Pro. To undo the X-Joint – turn both
Hex Screws
Anti/Counter Clockwise
– undo screws until there is pressure against the key.
Fig. (10.3)
CAUTION: Store your Xpert pole only in a warm, dry place
Because the XPERT pole uses pressure to remain in
position. The pole tightness and X-Joints should be
checked regularly during use, ideally every
30 minutes.
If there is any movement, DO NOT USE, until
you have re-tightened. Always check the
X-Joints at the same time.
To take down the pole, ensure the X-Lock is in static/
non-spinning mode and undo the 3 x Hex Adjuster
Locking Screws (DO NOT completely remove the
screws). Then turn the pole clockwise to contract/
release the pole. Once the pole has been removed
from its position, the Upper Dome can be removed.
Cleaning your pole
Fig. (11.1)
X-Clean & Micro-Fibre Cloths
X-POLE strongly recommends the use of X-CLEAN with our
specially designed Micro-Fibre Cloths to clean and maintain the
surface of your XPERT Pro Pole. You can purchase these items from
our website www.xpole.com (first select region, then search
for X-CLEAN) or your point of purchase.
DO NOT USE X-Clean on Brass, Powder Coated or Silicone Poles.
LOOSEN
LOOSEN
