3.5” USB2.0 HDD External Enclosure
Page | 5
3.
To install IDE hard disk on Model XM-EN3400-BK, connect the IDE and Power cable
as shown in Figure 3.
Figure 3
4.
To install SATA Hard disk on Model XM-EN3200-Bk (Shown in Figure 4) or XM-
EN3400-BK (Shown in Figure 4.1)
Figure 4
Figure 4.1
5.
After connecting the Hard disk, slide in the installed hard disk with panel back into
Enclosure, and use 4 provided screws to tighten the Hard Disk (Figure 5). Then insert
back both side plastic rail cover. Lastly, use the 2 screws to tighten the Enclosure
panel.
Figure 5
6.
After finish all hardware installation, you can connect the USB cable from the
Enclosure to the computer system.
