Developers
P.I. Engineering offers a free Software Development Kit with code samples in
C#, C++ and .NET. We also offer an SDK for Linux and Android application
samples. Please visit the Developers section on our website:
xkeys.com/develop.php.
Support
Should you encounter difficulty with the installation or programming, please
open the MW3 or ControllerMate Help File or check the troubleshooting guide
on our web site. You may also contact technical support.
E-mail: [email protected]
Phone: 1-517-655-5523
Compatibility
X-keys USB devices require MacroWorks 3 for Windows XP, Vista, or 7 or
ControllerMate for Mac OS-X. The X-keys Professional
also has a “Hardware
Mode” which gives it the ability to mimic a USB keyboard or mouse on any
USB enabled operating system (including Linux). Learn more about Hardware
Mode on our web site or contact our Technical Support Department
([email protected]).
Identifying the Keys
Select appropriate icons or use the blank legend sheet to create your own key
legends. The keycaps snap off with a fingernail or small screwdriver. Apply
the label under the keycap, and replace it. The key caps hold a legend 0.575"
wide and 0.5" high (14.6mm x 12.7mm). Other options are available for
printing legends for multiple units. Contact our Sales Department
([email protected]) for more information.
Tall and Wide Double-keys
The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller. Press
the double-key in place over the two exposed switch stems and configure it in
MW3.1 by selecting both keys, right-
clicking, and selecting “Apply Large Key”.
Compatible Accessories
Please visit the Accessories page on our website for details on the following.
X-keys USB Extender
– up to 150 feet via CAT 5 cable
Tall, wide, and quad keycaps
Colored and transparent key caps
Blank key blockers
