X-FIRE 1200 Granite, Инструкция по установке и эксплуатации

Страница: 29 / 48

630140_1 XFIRE_1200_GB_Manual_R ‐ emotion
18.3 Cleaning:
Before carrying out any of the following operations, ensure the the appliance is OFF and
completely cold.
Glass Panel:
Remove as described in section 11. This can be cleaned inside and out
with proprietary window-glass cleaner, or proprietary ceramic hob cleaner if badly stained.
Test on a small area first. Do not allow the glass to become badly stained as this will be
difficult to remove.
Limestone Surfaces:
Remember that limestone is porous and therefore susceptible to
marking in use. The limestone frame may be cleaned with a small amount of warm soapy
water. Any stubborn stains may be removed with a diluted liquid domestic bleach and water
solution. Superficial scratches or stubborn surface stains can be smoothed out using a fine
grade wet & dry sandpaper. Joints may be grouted using a matching tile grout. The
limestone frame may be sealed with an appropriate stone sealer (consult the retailer). This
will give some protection against staining such as red wine, tea or coffee, but may darken
the stone slightly.
Travertine Surfaces:
Remember that stone is porous and therefore susceptible to
marking in use. This frame may be cleaned with a small amount of warm soapy water. Any
stubborn stains may be removed with a diluted liquid domestic bleach and water solution.
The frame may be sealed with an appropriate stone sealer (consult the reailer). This will
give some protection against staining such as red wine, tea or coffee, but may darken the
stone slightly.
Granite Surfaces:
In everyday use, a soft lint-free duster should be used to keep
the granite clean and free of dust. Other marks, such as finger-prints may be removed form
the granite frame by using a proprietary window glass cleaner, or NET-TEX Hard Surface
Cleaner.
DO NOT ATTEMPT TO CLEAN THE GLASS WHILE IT IS HOT. NEVER OPERATE THE UNIT
WITH THE GLASS REMOVED.