14
SM2690-67 Instruction Manual
BUTTON FUNCTIONS
︰
UP
To increase the function value.
DOWN
To decrease the function value.
MODE
To confirm the setting value.
RESET
To clear the setting value and reverse to exercise selection main menu.
START/STOP
To start or stop training
RECOVERY
To test hear rate recovery status.
TOTAL RESET
To power on the computer again
DISPLAY FUNCTIONS
︰
TIME
Count up
– Without preset target time, computer will count up from 00:00, with 1
second increment.
Count down
– With preset target time, computer will cound down to 00:00 and remind
user by long beep sound for 8 seconds in STOP mode.
SPEED
Display current training speed from 0.0 to maximum 99.9 km or ml.
RPM
Display current training rotation per minute.
DISTANCE
Count up
– Without preset target distance, computer will count up from 0.00, with
0.1km increment.
Count down
– With preset target distance, computer will cound down to 0.00 and
remind user by long beep sound for 8 seconds in STOP mode.
CALORIES
Count up
– Without preset target calories, Calories will count up from 0 to maximum
990 with each 1 cal increment.
Count down
– With preset target calories, computer will count down to 0 and
remind user by long beep sound for 8 seconds in STOP mode.
PULSE
The computer will display pulse figure when receive the heart rate signal from
handgrip sensor.
WATT
Display current training watt figures.
RECOVERY
After work out, press
“RECOVERY” button: Computer will start counting down from
00:60 to 00:00, and detecting the heart rate recovery status measurment.
When reach to 00:00, computer will display the result by showing F1, F2 --- to F6.
(F1 indicated the best heart rate performance, and F6 is the worst)
Press the RECOVERY button again reverse to exercise program selection main
menu.
OPERATE INSTRUCTION:
1. Power on, LCD will display segment for 2 seconds with long beep sound. (drawing1), and display wheel
diameter (drawing2).
drawing 1 drawing 2
2. Preset User data from User 1 to User 4 (SEX, WEIGHT, HEIGHT and AGE) ; screen will enter standby
mode.
