background image

   

15 

 

 

 

It is better to do some warm-up exercise. Warm the muscle easy 

stretch, so use 5-10 mins to warm-up. Then stop and according 

below method to do stretch exercise for five times, and each 

foot do 10 seconds or more every time. After running, do those 

stretch exercises again 

1. Reach Down

 

Knees slightly bent and body slowly bent 

forward, back and shoulders relax, trying to touch toes. Keep 

10-15 seconds and relax. Repeat 3 times(See picture l). 

2. Hamstrings Stretches:

 Sitting on a clean cushion, put one 

leg straight, the other inward and close to the inside of the 

straight leg. Try to touch your toes with your hands. Keeping 

for 10 to 15 seconds, and relax. Repeat 3 times for each leg

 

(See picture 2).

 

3. Crus and Feet Tendon Stretches:

 Standing with two 

hands on the wall or tree, one leg behind. Keeping your legs 

straight and the heel on the ground, tilt to the wall or tree. Keep 

10 to 15 seconds, and relax. Repeat 3 times for each leg (See 

picture 3). 

4. Quadriceps Stretches:

 Keeping your balance with your left 

hand holding on the wall or table, then stretch your right heel 

toward your buttocks slowly, until you feel very tense in the front 

of your thigh. Keep10 to 15 seconds, and relax. Repeat 3 times 

for each leg (See picture 4). 

5. Sartorius (Inner Muscles of the Thigh Muscle    Stretches:

 

Sitting down with your soles opposite and knees outward Pull 

your feet toward your groin Keep 10 to 15 seconds

and relax. 

Repeat 3 times (See picture 5). 

 

 
 
 
 

Warm-up Exercise

 

Содержание 2500 INTERVAL
























Отзывы: