Wyse Customer Support
QSG - WSI 1.3.6 v3.doc
Pager 3 of 15
S
UMMARY
This is a Quick Start Guide to help you install and run the Wyse Simple Imager version
1.3.6
A
UDIENCE
Customers, 1
st
Level Support, and Systems Engineering Group
A
FFECTED
P
RODUCTS
Wyse Simple Imager V1.3.6
R
EQUIREMENTS
/I
SSUES
Execution of this application requires
•
A Windows 2000 server SP4 or Windows 2003 SP1 server (If you wish to use
Windows XP Pro SP2, see important notes below),
IN AN ISOLATED NETWORK.
•
IT CANNOT BE INSTALLED ON THE SAME SERVER WITH WYSE DEVICE
MANAGER
.
•
The WSI server and Thin Client MUST BE CONNECTED
TO EACH OTHER BEFORE INSTALLING THE
SOFTWARE.
Failure to connect the devices before
installation will result in a loopback network condition and a
subsequent inability to re-image your thin clients.
•
DHCP, IIS with FTP Services installed and running
•
Single network adapter supported. If you have two adapters, you must disable one
•
All software firewalls and Antivirus services stopped
•
A simple hub, unmanaged (inexpensive) switch or a crossover cable
•
Wyse Simple Imager software V1.3.6
•
An image file for the device requiring the image
IMPORTANT for Windows XP Pro SP2 Users:
1.
You will need to provide a working DHCP server. Windows XP Pro does not
include one.
2.
When installing and using WSI, ensure to run it on an isolated network.
3.
See Page 7 for installation instructions on Windows XP Pro.
NOTE:
If a previous version of WSI exists, you must remove it before installing this
version.
