Wyrestorm TX-SW-IW-0201, Быстрый старт

Страница: 4 / 4

Copyright © 2015 WyreStorm Technologies | wyrestorm.com
TX-SW-IW-0201 Quickstart Guide | 150828
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair or
replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and
excludes normal wear and tear or cosmetic damage.
Visit the product page located at wyrestorm.com for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
4 of 4
Audio and Video
Audio Formats Up to 7.1 DTS Master HD and Dolby True
HD
Video Resolution HDMI: Up to 3840 x 2160 @ 30Hz
VGA: Up to 1920 x 1200
See
Supported Video Resolutions for
cable distance restrictions
3D Support Blu-ray: Frame packing/sequential
Satellite/Cable: Interlaced stereoscopic
Video Input Impedance 100 Ω
Maximum Pixel Clock 297 MHz
Power
PoH Power over HDBaseT
Power Supply (Optional) 12V DC 1A
Max Power Consumption 25W
Dimensions and Weight
Height 0.98 in / 25 mm
Width 4.25 in / 108 mm
Depth 4.20 in / 106.7 mm
Weight 0.44 lbs. / 0.19 kg
Environmental
Operating Temperature 32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature -4°F ~ 140°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
Regulatory
Safety and Emission CE | FCC
RoHS Compliant
Specifications Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the transmitter and receiving
device and that both devices are powered on.
Note: When using PoH, to power the transmitter, verify that the
HDBaseT cable is properly terminated per the HDBaseT Wiring
section.
• Verify that the transmitter supports the output resolution of the source.
See Supported Video Resolutions.
• Verify that the receiving device and display support the output resolution
of the source.
i. Configure EDID Settings to a lower resolution.
ii. If transmitting 3D or 4K, verify that the HDMI cables used are 3D or
4K rated.
• Verify that the HDBaseT cable is properly terminated per the HDBaseT
Wiring section.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent 3rd party Device Control
• Verify that the IR or RS-232 cable(s) is properly terminated.
See IR Wiring for IR and RS-232 Wiring for RS-232.
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on the
device being control.