Copyright © 2015 WyreStorm Technologies |
SW-0402-MV-HDxx Quickstart Guide | 160317
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
Warranty Information
This product is covered by a 2 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair
or replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship
and excludes normal wear and tear or cosmetic damage.
Visit the product page located at
for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
4 of 4
Specifications
Audio and Video
Inputs
4x HDMI (1x 19-pin type A)
4x YUV (3x RCA Female)
4x CVBS – YUV Green (1x RCA Female)
4x VGA (1x 15-pin VGA VESA-D-SUB 15)
4x Audio In –YUV/CVBS Audio
(2x RCA Female)
4x Line In – VGA Audio (1x 3.5mm
(1/8in) Stereo)
Outputs
1/2x HDMI (1x 19-pin type A)
1x HDBaseT (8-pin RJ-45 female)
(SW-0402-MV-HDBT only)
2x S/PDIF (Digital Audio) RCA Female
Audio Formats
2ch analog | 2ch LPCM
Video Resolution
Input: Up to 1080p@60Hz 36bit
Output: 4K@60Hz 4:2:0 24bit
Maximum Pixel Clock
297 MHz
Communication and Control
HDMI
HDCP | EDID
DVI/D supported with adapter (not
included)
HDBaseT
EDID
Ethernet
10/100 Mbps auto-negotiating
(No IP Switcher Control)
Front Panel
Switcher control
IR
Switcher control with IR Ext for
connection to an IR Receiver.
RS-232
Switcher control with loop for additional
switchers.
Power
Power Supply
Input: 100~240V AC 50/50Hz
Output: SW-0402-MV-HDMI: 12V DC 3A
SW-0402-HDBT-HDBT: 12V DC 4A
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Dimensions and Weight
Height
42mm / 1.65in
Width
439mm / 17.3in
Depth
254mm / 10in
Weight
2.85 kg / 6.27 kg
Regulatory
Safety and Emission
CE | FCC | RoHS
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the transmitter and receiving
device and that both devices are powered on.
Note:
When using PoH, to power a receiver, verify that the HDBaseT cable is
properly terminated per the
section.
• Verify that the transmitter, matrix/receiver, and display support the
output resolution of the source. See
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D and/
or 4K rated.
• Verify that the HDBaseT cable is properly terminated per the
section.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent Device Control
• Verify that the handheld remote has a clear line of sight to the IR
Sensor on the front panel or the IR Receiver if being used.
• Verify that the IR cable(s) is properly terminated if using an external IR
Receiver. See
.
• Verify that the IR emitter is located near the IR Sensor on the front
panel if using an external IR Control System.
• Verify that the RS-232 cable is properly terminated. See
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on
the device being control.