Wyrestorm RX-70-4K-ARC, Быстрый старт

Страница: 4 / 4

Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair or
replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and
excludes normal wear and tear or cosmetic damage. Visit the product page located at
wyrestorm.com for additional
information on this product including important technical information not provided in this document and warranty terms
& conditions.
Specifications
Copyright © 2016 WyreStorm Technologies | wyrestorm.com
RX-70-4K-ARC v2 Quickstart Guide | 161006
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
4 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the transmitter and receiving device and that both devices are powered on.
Note: When using PoH, to power the transmitter, verify that the HDBaseT cable is properly terminated per the HDMI/HDBaseT Wiring section.
• Verify that the transmitter supports the output resolution of the source Refer to Video Resolutions in the Specifications table for the max distance
based on resolution.
• Verify that the receiving device and display support the output resolution of the source.
• Configure TX or source to output a lower resolution.
• If transmitting 3D or 4k, verify that the HDMI cables used are 3D or 4k rated.
• Verify that the HDBaseT cable is properly terminated per the
HDMI/HDBaseT Wiring section.
• Verify that all source and HDBaseT connections are not loose and are functioning properly.
No or Intermittent 3
rd
party Device Control
• Verify that the IR cable(s) is properly terminated. See IR Wiring .
• Verify that the IR emitter is located near the IR receiver on the device.
Power
Power Supply
Input: 100~240V AC 50/60Hz
Output: 12V DC 2A
Max Power Consumption 7.2W
PoH 48V
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
Maximum BTU 60 BTU/hr
Dimensions and Weight
Height 24.9mm/0.98in
Width 220mm/8.66in
Depth 89.9mm/3.54in
Weight 0.58kg/1.28lbs
Regulatory
Safety and Emission CE | FCC | RoHS
Audio and Video
Inputs 1x HDBaseT 8-pin RJ-45 female
Outputs 1x HDMI 19-pin type A
Audio Formats HDMI: 2ch and Up to DTS-X and Dolby Atmos | RX S/PDIF IN: 2ch PCM | Up to DTS digital and Dolby digital
Video Resolutions (Max)
Using HDMI
1920x1080p @60Hz 12bit (15m/50ft) | 16bit (7m/23ft)
3840x2160p @30Hz 4:4:4 8bit (7m/23ft) | @24Hz 4:2:0 HDR 10bit (3m/9.8ft)
4096x2160p @60Hz 8bit 4:2:0 (7m/23ft) | @60Hz 8bit 4:4:4 (7m/23ft)
Using Cat6
1920x1080 @60Hz 12bit (100m/328ft) | @60Hz 16bit (70m/230ft)
3840x2160p @30Hz 4:4:4 8bit (70m/230ft) | @24Hz 4:2:0 HDR 10bit (70m/230ft)
4096x2160p @60Hz 4:2:0 8bit (70m/230ft)
Using Cat6a/7
1920x1080 @60Hz 12bit (100m/328ft)
3840x2160p @30Hz 4:4:4 8bit (100m/328ft) | @24Hz 4:2:0 HDR 10bit (100m/328ft)
4096x2160p @60Hz 4:2:0 8bit (100m/328ft)
Color Depth 1080p: 48bit | 4K UHD: 24bit | HDR @24p: 10bit BT.2020
Maximum Pixel Clock 297MHz
Communication and Control
HDMI HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, RS-232, and Ethernet
IR 1x IR TX 3.5mm (1/8in) Mono | Bidirectional over HDBaseT | 1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
RS-232 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT
Ethernet 1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Bidirectional over HDBaseT
Audio Return Channel (ARC) Returns audio to source location from remote display via HDBaseT