Wyrestorm NetworkHD 600 series Скачать руководство пользователя страница 4

Copyright © 2018 WyreStorm Technologies | 

wyrestorm.com

NHD-600-TX | NHD-600-RX Quickstart Guide | 180306

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973) 

[email protected]

4 of 4

Warranty Information

WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a 
period of five (5) years from the date of purchase. Refer to the Product Warranty page on 

wyrestorm.com

 for more details on our limited 

product warranty.

Specifications

Troubleshooting

  

Ve

rify all NHD devices contain the latest version of firmware. This ensures that all devices are up to date and working at their highest performance level.

NetworkHD Software fails to locate TX/RX/CTL Devices

• 

Verify that all NHD and Network devices are powered On.

• 

Adjust Windows Firewall Settings – Create an exception for NetworkHD 
Console.

• 

Verify that the PC, CTL AV Port, and NHD encoders and decoders are on the 
same LAN/VLAN/Subnet.

• 

Verify that all network switches share the same VLAN configuration.

• 

Reboot all system components including the NHD-000-CTL and the PC.

• 

Ensure that only one CTL port is connected per LAN/VLAN. If only one LAN/
VLAN exists only use the AV port.

• 

Ensure the network switch is fully configured per the appropriate switch 
configuration guide.

Failure to Connect to CTL Controller

• 

Follow the previous steps for failing to connect to devices. If these are 
unsuccessful, press and Hold the reset button on the front of the CTL for 5 

seconds.

• 

After a reboot the CTL will be returned to the default IP address of 
192.168.11.243 for the control port and 169.254.1.1 for the AV port.

No Image Appearing on Displays

• 

Verify that all NHD, Network, Source, and Display devices are powered On.

• 

Verify that the configuration in NetworkHD Console is correct based on 

system layout and components used.

• 

Test sources and displays by connecting them directly together.

• 

Swap out the HDMI cable.

Audio and Video

NHD-600-TX

NHD-600-RX

Inputs

1x DP In: DisplayPort 20-pin 
1x HDMI In: 19-pin type A
1x Audio In/Out: 3.5mm (1/8in) TRS Stereo

1x 10GbE: 8-pin RJ-45 Female

Outputs

1x 10GbE: 8-pin RJ-45 Female
1x Audio In/Out: 3.5mm (1/8in) TRS Stereo

1x HDMI Out: 19-pin type A
1x Audio Out: 3.5mm (1/8in) TRS Stereo

Output Video Encoding

SDVoE

Encoding Data Rate

Max: 10Gb/s

End to End Latency (Max)

Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps

Audio Formats

2ch PCM | Multichannel: LPCM and Up to Dolby Atmos and DTS-X

Video Resolutions (Max)

2160p @60Hz 8bit 4:4:4 | 2160p @60Hz 12bit 4:2:2

Color Depth

1080p: 12bit | 2160p: 12bit 4:2:2 / 8bit 4:4:4

Maximum Pixel Clock

595 MHz

3D

HDMI 1.4b 3D: TnB, SbS, F.P

Communication and Control

HDMI

HDMI | HDCP 2.2

Ethernet

1x 10GbE SDVoE: 8-pin RJ-45 Female 10GBASE-T | 1x LAN: 8-pin RJ-45 Female 1000BASE-T

IR

1x IR TX: 3.5mm (1/8in) TS Mono Jack | 2 Way | Broadcast | Routed | API Programmable
1x IR RX: 3.5mm (1/8in) TRS Stereo Jack 2 Way | Broadcast | Routed | API Programmable 

RS-232

1x RS-232: 4-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable

Power

Power Supply

12V DC 3A

Max Power Consumption

TX: 15.24W | RX: 18.64W

Environmental

Operating Temperature

0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature

-20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU

TX: 52 BTU/hr | RX: 63.6 BTU/hr

Dimensions and Weight

Rack Units/Wall Box

<1U

Height With | Without Feet

45mm/1.78in | 35mm/1.38in

Width With | Without Brackets

263.6mm/10.38in | 230mm/9.06in

Depth With | Without Handles

139mm/5.48in

Weight

1.52kg/3.34lbs

Regulatory

Safety and Emission

CE | FCC | RoHS

Note: 

WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.

Отзывы: