Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit repair,
component replacement or complete product replacement in the event of malfunction. The decision to repair or replace will
be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and excludes normal
wear and tear or cosmetic damage. Visit the product page located at
wyrestorm.com
for additional information on this
product including important technical information not provided in this document and warranty terms & conditions.
Specifications
Copyright © 2016 WyreStorm Technologies |
wyrestorm.com
MX-0606-HDBT-H2 v2 | MX-0808-HDBT-H2 v2 Quickstart Guide | 160913
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
4 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
•
Verify that power is being supplied to the transmitter and receiving device
and that both devices are powered on.
Note:
When using PoH, to power the transmitter, verify that the HDBaseT cable
is properly terminated per the
HDMI/HDBaseT Wiring
section.
•
Verify that the transmitter supports the output resolution of the source. See
Supported Video Resolutions
.
•
Verify that the receiving device and display support the output resolution of
the source.
•
If transmitting 3D or 4K, verify that the HDMI cables used are 3D and/or 4K
rated.
•
Verify that the HDBaseT cable is properly terminated per the
HDMI/
HDBaseT Wiring
section.
•
Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent Matrix or 3
rd
party Device Control
•
Verify that IR and RS-232 cable(s) are properly terminated per the
appropriate wiring section:
•
IR:
IR Wiring
•
RS-232:
RS-232 Wiring
•
Verify that the IR emitter is located over or near the IR sensor on the device.
Move the emitter closer or further from the sensor as the IR signal can be
too strong in some cases.
•
Verify that the IR receiver is in line of sight of the hand-held remote.
Troubleshooting Tips:
•
WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
•
Use a flashlight to locate the IR receiver behind any tinted panels on the
device being controlled. It will likely appear as a small round disc.
Power
Power Supply
Input: 100~240V AC 50/60Hz
PoH
48V 15.4W (each HDBT output)
Max Power Consumption
6x6: 120W | 8x8: 140W
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU
6x6: 409.4 BTU/hr | 8x8: 477.6 BTU/hr
Dimensions and Weight
Rack Units/Wall Box
3U
Height
87.7mm/3.46in
Width
438mm/17.25in
Depth
396mm/15.6in
Weight
6x6: 8.2kg/18.04lbs | 8x8: 8.48kg/18.66lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
Audio and Video
Inputs
6/8x HDMI 19-pin type A
Outputs
4/5x HDMI 19-pin type A (Mirrors HDBaseT) | 6/8x HDBaseT 8-pin RJ-45 female
Audio Formats
2ch PCM | Up to DTS-X and Dolby Atmos
Video Resolution (Max)
HDMI
1920x1080p @60Hz 12bit (15m/50ft) | 16bit (7m/23ft)
3840x2160p @24/25/30Hz 4:4:4 8bit (7m/23ft) | @24Hz 4:2:0 HDR 10bit (3m/9.8ft)
3840x2160p @24Hz 4:2:0 HDR
10bit per channel (3m/9.8ft)
Using Cat6
1920x1080 @60Hz 12bit (100m/328ft) | 16bit (70m/230ft)
3840x2160p @30Hz 4:4:4 8bit (70m/230ft) | @24Hz 4:2:0 HDR 10bit (70m/230ft)
4096x2160p @60Hz 4:2:0 8bit
(70m/230ft)
Using Cat6a/7
1920x1080 @60Hz 12bit (100m/328ft) | 16bit (100m/328ft)
3840x2160p @24/25/30Hz 4:4:4 8bit (100m/328ft) | @24Hz 4:2:0 HDR 10bit (100m/328ft)
4096x2160p @60Hz 4:2:0 8bit
(100m/328ft)
Color Depth
1080p: 16bit | 4K UHD: 8bit | HDR @24p: 10bit per channel BT.2020
Maximum Pixel Clock
HDMI: 600MHz | HDBaseT: 297MHz
Communication and Control
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT
HDCP 2.2 | EDID | ARC | PoH (1way) | Bidirectional IR and Ethernet
Ethernet
1x 8-pin RJ-45 female | Web UI | IP Control | Bidirectional over HDBaseT
IR
1x IR Ext - 3.5mm (1/8in) Stereo | Matrix Control | 6/8x IR TX - 3.5mm (1/8in) Mono | Bidirectional over HDBaseT |
6/8x IR RX - 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT
RS-232
Matrix Control | Firmware Updates
Audio Return Channel (ARC)
Returns audio to source location from remote display via HDBaseT | 6x6: Outputs 5-6 only | 8x8: Outputs 6-8 Only
