Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair
or replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship
and excludes normal wear and tear or cosmetic damage.
Visit the product page located at
wyrestorm.com
for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
Specifications
Audio and Video
Inputs
1x HDBaseT 8-pin RJ-45 female
Outputs
1x HDMI 19-pin type A
Audio Formats
2ch PCM | Up to 7.1 DTS-HD Master Audio
and Dolby TrueHD
HDMI Max
Resolution
1920x1080@60Hz (1080p60)
4096x2160p@60Hz 4:2:0 (4K)
HDBaseT Max
Resolution
1920x1080@60Hz (1080p60)
4096x2160p@30Hz 4:2:0 (4K)
Color Depth
1080p: 36bit | 4K: 24bit
Maximum Pixel Clock
297mHz
Communication and Control
HDMI
EDID | CEC
DVI/D with adapter (not included)
HDBaseT
1x 8-pin RJ-45 female
EDID | PoH | Bi-directional IR
IR
1x 3.5mm (1/8in) Mono – IR TX
1x 3.5mm (1/8in) Stereo – IR RX
Bi-directional external device control via
HDBaseT (IR TX/IR RX)
Note:
Matrix control is not available via IR
from a remote zone.
RS-232
1x 3-pin Screw Down Phoenix Connector
Firmware update only.
Power
Power Input (Optional)
Input: 100~240V AC 50/60Hz
Output: 12V DC 1.5A
Max Power
Consumption
6.6W
PoH
48V 15.4W
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C)
10% ~ 90%, non-condensing
Maximum BTU
22.52 BTU/hr
Dimensions and Weight
Height
18mm/0.71in
Width
181.7mm/7.16in
Depth
94mm/3.71in
Weight
0.4Kg/0.88lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
Copyright © 2015 WyreStorm Technologies |
wyrestorm.com
MX-0404-HDBT-H2-KIT Quickstart Guide | 160302
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
4 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the matrix and HDBaseT
receivers and that both devices are powered on.
Note:
When using PoH, to power the receivers, verify that the HDBaseT cable is
properly terminated per the
HDMI/HDBaseT Wiring
section.
• Verify that the matrix supports the output resolution of the source. See
Supported Video Resolutions
.
• Verify that the receiving device and display support the output
resolution of the source.
• Configure EDID Settings to a lower resolution.
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K
rated.
• Verify that the HDBaseT cable is properly terminated per the
HDMI/
HDBaseT Wiring
section.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent 3rd party Device Control
• Verify that the IR cable(s) is properly terminated. See
IR Wiring
.
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on
the device being control.
