background image

pg. 11 

 

Warranty coverage 

 

Wyred 4 Sound’s warranty obligations are limited to the terms set forth below: 

Wyred 4 Sound, as defined below, warrants this Wyred 4 Sound-branded 

hardware product against defects in materials and workmanship under normal use 
for a period of FIVE (5) YEARS from the date of retail purchase by the original end 
user purchaser ("Warranty Period"). If the product has been transferred from the 
original owner to a second hand owner it has a ONE (1) YEAR warranty, valid from 
the original date of purchase by the original owner. The remote control is covered 
for warranty replacement in the first year.

 

 

If a hardware defect arises and a valid claim 

is received within the Warranty Period, at its option, Wyred 4 Sound will either (1) repair the 
hardware defect at no charge, using new or refurbished replacement parts, or (2) exchange 
the product with a product that is new or which has been manufactured from new or 
serviceable used parts and is at least functionally equivalent to the original product. Wyred 4 
Sound may option that you replace defective parts with new or refurbished user-installable 
parts that Wyred 4 Sound provides in fulfillment of its warranty obligation. A replacement 
product or part, including a user-installable part that has been installed in accordance with 
instructions provided by Wyred 4 Sound, assumes the remaining warranty of the original 
product or ninety (90) days from the date of replacement or repair, whichever provides longer 
coverage for you. When a product or part is exchanged, any replacement item becomes your 
property and the replaced item becomes Wyred 4 Sound's property. Parts provided by Wyred 
4 Sound in fulfillment of its warranty obligation must be used in products for which warranty 
service is claimed. When a refund is given, the product for which the refund is provided must 
be returned to Wyred 4 Sound and becomes Wyred 4 Sound's property.

 

EXCLUSIONS AND LIMITATIONS 

 

Wyred 4 Sound does not warrant that the operation of the product will be uninterrupted or 

error-free. Wyred 4 Sound is not responsible for damage arising from failure to follow 

instructions relating to the product's use. This warranty does not apply: (a) to damage caused 

by use with non-Wyred 4 Sound products; (b) to damage caused by accident, abuse, misuse, 

flood, fire, earthquake or other external causes; (c) to damage caused by operating the 

product outside the permitted or intended uses described by Wyred 4 Sound; (d) to damage 

caused by service (including upgrades and expansions) performed by anyone who is not a 

representative of Wyred 4 Sound or a Wyred 4 Sound Authorized Service Provider; (e) to a 

product or part that has been modified to significantly alter functionality or capability without 

the written permission of Wyred 4 Sound; (f) if any Wyred 4 Sound serial number has been 

removed or defaced.  

 

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE 

EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER 

Содержание mINT

















Отзывы: